High Park, ON Mould Damage Remediation

Your High Park home or commercial property can quickly become infested with mould if a source of water is present. Mould can spread throughout a property in as little as 48 hours. Since mould can produce allergens and irritants, you should call us to inspect your home if you suspect you have a mould problem. If mould is found, we have the training, equipment, and expertise to remediate your mould infestation.

Learn more about mould and what to do until help arrives by reviewing these mould damage tips.

SERVPRO of Toronto High Park, Mount Pleasant, Riverdale, Oakwood Village

If You See Signs of Mould, Call Us Today – (647) 268-7390

Understanding Mold

Confusion and misunderstanding surround the topic of mould and mould remediation. Some restoration businesses even make claims to remove all mould from a building. This is a fallacy. Mould spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

  • Mould is present almost everywhere, indoors and outdoors.
  • Mould spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mould spores thrive on moisture. Mould spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mould remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mould may return. 
  • Mould often produces a strong, musty odor and can lead you to possible mould problem areas.
  • Even higher-than-normal indoor humidity can support mould growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mould problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mould damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

SERVPRO of Toronto High Park, Mount Pleasant, Riverdale, Oakwood Village is locally owned and operated, so we are part of the High Park community too. When you have a water or mould damage issue, we’re already nearby and ready to help. We’re also part of a network of over 2270, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

We proudly serve Toronto, ON, High Park, ON, and surrounding areas.

Highly Trained Water and Mould Restoration Specialists

We specialize in water and mould damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.  Learn about our water damage training and certificates.

The Mould Remediation Process

Every mould damage scenario is different and requires a unique solution, but the general mould remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (647) 268-7390

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mould Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mould. Since mold can be hidden, we use various technologies to detect mould and hidden water sources. 

Step 3: Mould Containment

To keep the mould spores from spreading further, we will use various mould containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your High Park, ON home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mould.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mould spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mould spores while the mould remediation is in process.

Step 5: Removing Mould and Mould-Infested Materials

Depending on the amount of mould growth and the types of surfaces involved, the mould remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mould colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mould, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odours and provide deodourisation using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your High Park, ON home or business back to normal. Depending on the severity of mould damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows Mould

In High Park, ON, SERVPRO of Toronto High Park, Mount Pleasant, Riverdale, Oakwood Village is ready to tackle and resolve any mould issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mould. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mould job. Reach us at (647) 268-7390 - We’re ready to activate our team to remediate your mould.